paul smiths-Ford Mondeo car key programming

Location: Home - > Support
Ford Mondeo car key programming

01 Mondeo paul smiths, take over the programmed key and use the correct profile , methods of operation are as follows :

1. will be the first key into the ignition switch and ignition switch from OFF position to RUN position, the time to keep 1S

2. the ignition switch to the OFF position , while the first key pulled out .

3. 5S within the key is removed , the second key into the ignition switch and ignition switch from OFF position to the RUN position , keeping 1S.

4. the ignition switch to the OFF position , and the second to pull out the key .

5. in the ignition switch to the OFF position after the 10S within the ignition switch to the OFF position to RUN position to maintain the ignition switch in RUN position when the less than 5S.

6. check the new key can be programmed to start the engine , the ignition switch to the OFF position , about 5S , and then try to start the engine with the new programming to the OFF position , about 5S asics onitsuka tiger yellow, and then try to use the new off programmed to start the engine .

7. If the ignition key even when the program more , and then from a starting step , repeat the key programming process .

attention; If the programming is not successful , the new key will not start the engine , while anti-theft indicator will flash burberry outlet hackney, then allows the ignition switch in RUN position to maintain more than 30S , then restart the operation in step 1 . up to 8 Programming the key .